This Premium kit contains everything you need to build your own Traverser using smooth rods with linear bearings, and a single start, 2mm pitch T8 lead screw for ultra precision. Can be used with OO or N gauge Model Railways.
This is a DIY kit which only includes the movement hardware and software, not a complete Traverser itself ( as each persons requirement is different, and postage would be more expensive ) but includes a guide as to how it can be used to build your finished Traverser.
The Premium kit is supplied with a TMC2208 stepper driver meaning you get ultra smooth and ultra quiet operation.
The Premium Kit contains the Following
|Nema 17 Stepper Motor 1.8deg|
|Hall Effect Magnetic Sensor Module|
|Nema17 Stepper Motor Bracket|
|Model Railway DCC Stepper Controller for Arduino Nano – Assembled|
|Arduino Nano v3|
|400mm 2mm Pitch, 1 Start T8 Lead Screw with Pillow Mounted Bearings|
|2 x 400mm Smooth Steel Rods|
|2 x 400mm Smooth Steel Rod Holders|
|4 x Ali mounted linear bearings for stability|
|2 x 8mm Pillow Bearing holders for the T8 Lead screw|
The kit will be fully assembled for testing (packaged as component parts) and the Nano will be uploaded with our Standard Traverser Sketch ( 2 tracks, Accessory Address 200 and 201 ). The sketch will also be emailed to you. From there DCC interface will work with you to create the specific sketch you require for your project.
Details instructions on how to create your own Traverser from the kit will be included.