Description
This Premium kit contains all our most popular DCC Turntable products into one order – providing you with means to index your turntable from DCC or Keypad. Can be used with OO or N gauge Model Railways. This kit features a direct mount plate which mounts directly below the TurnTable using 40mm stand-offs with PCB mounting holes.
The Premium kit contains a 1.8 deg stepper motor and a TMC2208 Super Silent Stepper Driver combined to give 3200 steps per revolution providing much finer positioning of the bridge to the index tracks and incredibly silent operation. The fine controlled movement is ideal for N gauge where the track is much smaller.
The Turntable Indexing is controlled using DCC Accessory addresses from your Command Station or via the optional KeyPad Controller ( available separately ).
The DCC Indexing Turntable Controller Kit can now be easily configured via an SD Card – amend the configuration on your home PC, pop the card back in the controller and reset for the updated index configuration to be applied. Its Easy and Fast.
The Kit is built to order so please allow up to 14 days from ordering to dispatch.
The Premium Kit contains the Following
| Nema 17 Stepper Motor (1.8 deg) |
| TMC2208 Super Silent Stepper Driver |
| 4mm – 5mm flexible coupling |
| Hall Effect Magnetic Sensor Module |
| Laser Cut Direct Mount plate in Acrylic, with supports and bolts |
| Model Railway DCC Turntable Accessory Decoder for Arduino Nano – Assembled |
| Arduino Nano v3 |
| Micro SD Card Reader for configuration |
| I2C Interface for optional KeyPad Controller |
The kit will be fully assembled for testing (packaged as component parts) and the Nano will be uploaded with our Standard Turntable Sketch ( 4 tracks, Accessory Address 200, 201, 202 and 203 ). The sketch will also be emailed to you upon request. From there DCC Interface will work with you to create the specific sketch you require for your project – if you need help.
