This Premium kit contains all our most popular DCC Turntable products into one order – providing you with means to power your turntable from DCC. Can be used with OO or N gauge Model Railways.
The Premium kit contains a 0.9 deg stepper motor featuring 400 steps per revolution ( on full stepper mode ) meaning you get much finer positioning of the bridge to the index tracks – this is ideal for N gauge where the track is much smaller.
New : You can now select “No Stay Alive” , or “Stay Alive” – which will add in an auto reverse option to allow you to maintain power to the bridge and reverse the polarity when moving off ( requires you to make alteration to Peco Turntable bridge power contacts – Guide Here). This option comes with the additional parts listed here.
The Premium Kit contains the Following
|Nema 17 Stepper Motor 0.9deg|
|Hall Effect Magnetic Sensor Module|
|Nema17 Stepper Motor Bracket|
|Model Railway DCC Turntable Accessory Decoder for Arduino Nano – Assembled|
|Arduino Nano v3|
If Stay Alive is selected, these additional parts are also included ( Stay-Alive Kit )
|4mm ID Brass Collar|
|Isolating Stepper Collar|
|60mm spacer x 3|
The kit will be fully assembled for testing (packaged as component parts) and the Nano will be uploaded with our Standard Turntable Sketch ( 2 tracks, Accessory Address 200 and 201 ). The sketch will also be emailed to you. From there DCC interface will work with you to create the specific sketch you require for your project.